Blog

The reasons for the wear of the granulator in the granulation process of organic fertilizer production line

2024/03/09
1. Material elements. Livestock manure fermenter in organic fertilizer production line mainly deals with dry powder materials. Due to the different hardness of materials, uneven force will be caused in the process of kneading into balls, increasing the wear of organic fertilizer equipment.

2. Raw material elements of poultry manure fermenter equipment. Chicken manure fermenter equipment is friction material, direct force. Material friction and anti - kneading force are equipment wear can not be ignored.

3. Feed uniformity factor. The axis of the double stick of chicken manure fermenter is parallel to the surface of the equipment, one end feeds more, the other end feeds less, the force on both ends of the equipment is uneven, and the friction between the equipment and the material increases. Equipment wear.

4. Material moisture, pH. The equipment is made of stainless steel as the main raw material, which has a great reaction to the pH and moisture of the material. If the moisture and PH of the material is not appropriate, it will cause acid and alkali corrosion on the surface of the equipment, and then damage the equipment.

5. Operation damage. Do not operate according to the operation rules and regulations, equipment gap adjustment is not effective, or violate the load, open the fermenter with feed livestock and poultry manure; Another kind of work damage is the material is not cleaned, containing iron, stone and other miscellaneous particles, serious damage to the appearance of the equipment.

The double roller granulator really realizes the recycling of resources and greatly protects the environment. In terms of environmental protection, the processing operation of this equipment adopts the non dry normal temperature process, which has high particle strength and is more obvious than other granulation methods, especially suitable for the occasions where the bulk specific gravity of products increases. More importantly, the mechanical transmission system of the roll extrusion granulator is completely sealed in the machine body. As the powder materials complete the granulation process in the wet state, there is no discharge of the three wastes during the granulation of the roll to roll granulator and the subsequent process operation, which truly realizes green production. The double roll extruding granulator has realized the green reuse of resources and has huge market potential.