1. The shaft of the fertilizer mixer bears the full load of the negative machine, so good lubrication has a great relationship with the life of the bearing. It directly affects the life and operation rate of the machine. Therefore, the injected lubricating oil must be clean and the seal must be good. The main oil filling point of this machine:
(1) Rotating bearing, (2) Roll bearing, (3) All gears, (4) Active bearing, sliding plane.
3. Pay attention to whether all parts of the fertilizer mixer work normally.
4. Whether it is mixer or fertilizer granulator, pay attention to check the wear degree of easily worn parts and replace worn parts at any time.
5. The dust and other things should be removed when the horizontal mixer is placed on the underframe plane of the movable device, so as to avoid that the movable bearing can not move on the underframe when the machine encounters the materials that are not fragile, causing serious accidents.
6. If the bearing oil temperature of mixer rises, stop the machine immediately to check and eliminate the cause.
7. If there is an impact sound when the rotating gear in the fertilizer mixer is running, it should be stopped immediately for inspection and eliminated.
